GLCD 128x64 display Graphic LCD Module w/KS0107+KS0108 Black on YG - 128x64 Dots - Graphic LCD Display
- Buy 10 for US$10.30 each and save 3%
- Buy 30 for US$10.00 each and save 6%
- Buy 50 for US$9.71 each and save 8%
- Buy 100 for US$9.42 each and save 11%
- Buy 500 or more Quote Request
-
This Item:
GLCD 128x64 display Graphic LCD Module w/KS0107+KS0108 Black on YG
US$10.59
-
8051 Microcontroller Development Board for Graphic LCD ERM12864-2
US$44.75
-
Total price
※ Product Recommendation
We recommend the replacement of ERM12864SYG-2 named ERMC12864SYG-2 that is more cheap ,sufficient stock and the same quality.
Description
ERM12864SYG-2 is yellow green background with 128x64 monochrome dark blue pixels,S6B0107 and S6B0108 controller that is extremely common and well documented,6800 8-bit parallel interface,single led backlight with yellow green color included can be dimmed easily with a resistor or PWM,stn-lcd positive,wide operating temperature range,rohs compliant,compact size.
It's easily controlled by MCU such as 8051,PIC,AVR,ARDUINO,ARM and Raspberry Pi.It can be used in any embedded systems,industrial device,security,medical and hand-held equipment.
Of course, we wouldn't just leave you with a datasheet and a "good luck!".For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and Development Kit at the bottom of this page.
Datasheet for Graphic LCD Module,Controller IC
Format | Documents Name | Version | Language | Update Date | Size |
---|---|---|---|---|---|
128x64 Graphic LCD Module Datasheet | 1.0 | English | Jul-04-2012 |
429K
|
|
Controller IC S6B0107 Datasheet | 1.0 | English | Jun-01-2000 | 142K | |
Controller IC S6B0108 Datasheet | 1.0 | English | Jun-01-2000 | 109K |
Tutorial- 8051 Microcontroller
Format | Documents Name | Version | Language | Update Date | Size |
---|---|---|---|---|---|
1.0 | English |
Jun-18-2009
|
45K | ||
1.0 | English |
Sep-25-2009
|
179K | ||
N/A | N/A |
N/A
|
N/A |
Gross Weight (kg) | 0.0970 |
---|---|
Manufacturer | EastRising |
Continuity Supply | We promise the long term continuity supply for this product no less than 10 years since 2015. |
Part Number | ERM12864SYG-2 |
Display Format | 128x64 Pixels (Dots) |
Interface | 6800 8-bit Parallel |
IC or Equivalent | S6B0107 , S6B0108 |
Appearance | Dark Blue on Yellow Green |
Diagonal Size | 2.9” |
Connection | Pin Header |
Outline Dimension | 93.0(W)x70.0(H)x13.0(T)mm |
Visual Area | 72.00x39.00mm |
Active Area | 66.52(W)x33.24(H) |
Dot (Pixel) Size | 0.48x0.48mm |
Dot (Pixel) Pitch | 0.52x0.52mm |
IC Package | COB |
Display Type | STN-LCD Yellow Green |
Touch Panel Optional | No |
Sunlight Readable | Yes |
Viewing Direction | 6:00 |
Backlight Color | Yellow Green Color |
Backlight Current (Typ) | 45mA |
Power Supply(Typ) | 5V |
Supply Current for LCM(Max) | 6mA |
Operating Temperature | -20℃~70℃ |
Storage Temperature | -30℃~80℃ |
-
Maetin Paz
2024-02-23 21:01:35
Hello, I will begin a design with this 4.3" screen. I will be using a resistive touchscreen panel. I would like to know if you could recommend an IC that can control both the screen and the resistive panel. My idea is to use an MCU with SPI communication to interface with a screen and touchscreen controller, thus enabling me to control the images. Could you recommend some low-cost ICs for this purpose? I was thinking of purchasing them from the LCSC Electronics store, and I hope to find them there. Your assistance would be greatly appreciated. Thank you.
2 answers-
Janice Lee
2024-02-24 03:46:33
Dear Maetin,
Pls note our 4.3'' TFT display screen only supports RGB mode, SPI is unavailable. Maybe will you consider to use the other design which is 4.3'' TFT screen with RA8875 controller board? there is a chip RA8875 on display board which is support to control TFT screen and resistive touch panel, here is the link where you could check such design https://www.buydisplay.com/tft-display/mcu-tft-display?cotroller_ic=734&diagonal_size=290, pls refer to.
Any problems, pls write me back. -
Maetin Paz
2024-02-24 15:38:45
Hello, thank you for your response. I understand that the screen only supports RGB. What I'm looking for is a chip that can control the screen, acting as an interface between an MCU and the display. I wanted to use the RA8875 in my customized design, but it's difficult and expensive to obtain. I've used the FT812 in other designs, but they are very expensive ICs. Now, I'm considering the SSD2831QL9, but perhaps you could recommend another low-cost IC similar to the SSD2831QL9, RA8875, or FT812 that can work with this screen. Thank you."
-
-
Willibald Kallmeier
2023-11-15 13:08:17
I recently purchased the ER-TFT070A2-6-5633 which is a 7 inch color IPS TFT LCD from you. It's all working so far. I would like to install a font chip (U6) and a serial flash chip (U4). What do I have to consider in terms of hardware (jumper, etc.).
Yours sincerely, Willi Kallmeier1 answer-
Janice Lee
2023-11-16 03:04:31
Dear Willi,
This item doesn't support to install font chip due to the design of controller LT7683 but support to install flash chip, pls note you need to load the images to flash before soldering it on PCBA, and then drive it by software. Thanks.
-
-
Chris Schimp
2023-11-14 00:32:47
Hello,
Could I get the init commands for this display?1 answer-
Janice Lee
2023-11-14 07:13:18
Dear Csutomer,
Yes. We could offer init code and will send to you via email. Pls check your mailbox later. Thanks.
-
-
Brendan Hoskins
2023-11-06 23:22:53
What is the minimum and maximum sustained brightness of this display? What is the typical brightness rating of this display? The datasheet says one thing while the specifications tab on the website says another thing.
What is the total power consumption of this display in watts? Please provide the operating conditions this power consumption was measured with.1 answer-
Sajay Peng
2023-11-07 01:53:38
Hi Brendan,
I'm sorry I don't know what you mean, Do you mean there is a conflict between datasheet and description on website?
Pls regard the info indicated in datasheet page 12 as correct version https://www.buydisplay.com/download/manual/ER-TFT065-1_Datasheet.pdf
Brightness changes when different current apply, DVDD:3.3V 3mA AVDD 10.4V 17mA VGL:-7V 300uA VGH:16V 200uA VCOM:3.6V-4.4 20uA
Thanks.
-
-
Sukhdarshan Vinayak
2023-09-20 09:20:52
Hey, I am a noob to electronics and thinking of using this 128x160 1.8 inch Color TFT LCD Display with ST7735 Controller SPI in my project. So, does the TFT Display come with a pre-programmed ST7735 Controller or do we have to program the Controller ourselves from designing the schematic to driver firmware? Or it comes with direct plug-and-play like pre-connected and we have to use the SPI pins like SDA, SCL, CLK, VCC, and GND of MCU to make the connection to the Display.
1 answer-
Sajay Peng
2023-09-20 09:38:15
Hi,
ST7735 controller already embedded on ER-TFT018-3 TFT Display, It support 4 WIRE SPI interface, You need to use the SPI pins like SDA, SCL, CLK, VCC, and GND of MCU to make the connection to the Display.
At the bottom of the product page https://www.buydisplay.com/128x160-1-8-inch-color-tft-lcd-display-with-st7735-controller-spi#additional, You can download C51 reference code as well as interfacing drawing.
Thanks.
-
-
Vahid Mizbani
2023-08-08 12:07:32
Hello, can I use this LCD to replace aqm1602-nlw without changing the LCD program? Is the only difference between these 2 LCDs only in the number and type of pins and the size of the LCD? And are they compatible?
checkk this link , https://akizukidenshi.com/catalog/g/gP-12486/1 answer-
Janice Lee
2023-08-09 06:06:53
Dear Vahid,
We confirmed that our ERC1602-4 is not compatible with AVG1602-nlw after viewing the datasheet for them, there are some differences on hardware and software as well. For hardware, the obvious difference listed on mechnical drawing. For software, the setting for LCD contrast would be different even though they're using the same one controller IC. Pls note it. Thanks and have a nice day!
-
-
Jaafar khalaf
2023-08-02 06:49:48
since ERM19264FS-4 is positive FSTN, is it readable in sunlight or intense light?
1 answer-
Sajay Peng
2023-08-02 08:03:11
HI, ERC19264FS-4 is FSTN TYPE display, It's sunlight readable, Thanks.
-
-
Vicente Palilio
2023-06-17 23:15:41
Can this be use for vending machine? Is there enclosure available for this model? Thankyou
1 answer-
Sajay Peng
2023-06-19 01:38:56
Sure it can be used as vend machine, You could use your MCU to control the unit.
Sorry we have no enclosure for it, You need to develop on your own.
Thanks.
-
-
Mirco Costantini
2023-02-28 13:19:27
Is this display available with the I2C interface version?
1 answer-
Sajay Peng
2023-03-01 03:41:35
Sorry we don't have the same display with IIC interface, For this kind of display with grayscale, IIC communication speed is quite slow, So few customers are using IIC and we are not intended to offer such an option, Thanks.
-
-
Jean Aymer
2022-09-05 19:51:26
Hello,
What is the refresh rate of this display ?
Thank you1 answer-
太鹏 彭
2022-09-06 02:10:29
Hello,
What do you mean refresh rate of the display?
Pls refer to SSD1322 datasheet page 48 to 52 for details https://www.buydisplay.com/download/ic/SSD1322.pdf
Thanks.
-
The information below is required for social login
Sign In
Create New Account