1.3 inch White OLED Display Screen 128x64 SPI I2C SH1106

Description

ER-OLED013-3W is a 1.3-inch white passive-matrix OLED display panel with a 128×64 pixel format, . Because it is self-emissive OLED rather than LCD, it needs no backlight, delivers a true free viewing angle in all directions, and keeps module thickness down to just 1.4 mm (34.50×23.02 mm outline, 29.42×14.70 mm active area). The panel is driven by an integrated SH1106 controller in COG packaging, making it a drop-in graphic engine for low-power embedded systems.

ER-OLED013-3W talks to the host over a selectable bus: 3-wire SPI, 4-wire SPI, I²C, or 8-bit 6800 / 8080 parallel, chosen via the BS0–BS2 strap pins. Logic runs on 1.65–3.3 V (typ. 2.8 V) and draws only ~180 µA typical operating current for VDD, with an internal charge-pump DC/DC option (VBAT 3.5–4.2 V) or external 12 V VCC supply mode, giving designers flexibility between battery-powered and line-powered products. Sleep-mode current is as low as 1 µA on VDD, ideal for always-on standby UIs.

ER-OLED013-3W connects through a 30-pin soldering type FPC,no connector is needed and exposes the full SH1106 signal set (CS#, RES, D/C#, RW/WR, RD, D0–D7, IREF brightness resistor, VCOMH cap, charge-pump caps C1/C2). It ships without a breakout board, so it pairs naturally with our optional Arduino adapters, level shifters, and demonstration code for Atmel AVR, STM32, ESP32, and Raspberry Pi. No touch layer is mounted—this is a pure output display.

Thanks to the OLED structure, the module has no backlight bleed, switches pixels instantly, and is rated for −40 to +85 °C operation and storage, outperforming most TFT/LCD modules in cold-start and outdoor-indoor crossover scenarios (not sunlight-readable, per datasheet, but excellent for dim/cabinet environments). Typical lifetime is 10k hours at 120 cd/m² and up to 30k hours at 80 cd/m².

That is suitable for a wide range of applications, including industrial instruments, portable test gear, medical aux panels, smart-home controllers, wearable dev kits, sensor readouts, and retro-style HUDs where monochrome crispness and low power matter more than full color."

The FPC is the soldering type,no need connector.Please check ourER-OLED013A1-1W if you want the single sided type FPC with ZIF connector.

Of course, we wouldn't just leave you with a datasheet and a "good luck!".For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and Development Kit at the bottom of this page.

 

Datasheet

Format	Documents Name	Language	Update Date	Size
	ER-OLED013-3_Series_Datasheet	English	Aug-18-2026	720K
	Controller IC SH1106 Datasheet	English	Nov-01-2011	1.4M

Tutorial

Format	Documents Name	Language	Update Date	Size
	8051 Interfacing and Demo Code	English	Aug-18-2026	375K